2D barcodes at the till: what Sunrise 2027 means for suppliers
GS1 Sunrise 2027 for UK suppliers: QR codes powered by GS1, Digital Link or DataMatrix, and the data, labels, printers and checks behind each code.
Published

Sunrise 2027 is GS1’s industry target for retail tills to read a product’s GTIN from a 2D barcode, such as a QR code, as well as from a linear barcode, by the end of 2027. In the UK the codes are already on supermarket shelves, and some tills already scan them.
For a supplier, putting the symbol on the pack is the easy part. A 2D barcode can carry far more than a GTIN, and every extra item of data, such as a batch, an expiry date or a serial number, has to come from a business system and be printed correctly on every pack. This guide covers the decisions that involves, in the order they usually need to be made.
What is changing, and what isn’t
- Most products will carry both codes for some time. GS1’s guidance is that a product with a 2D barcode keeps its linear barcode until 90% of point-of-sale scanning can read the 2D symbol, and that linear barcodes will remain for as long as they are needed.
- Own-label ranges can move first. A retailer controls the tills that scan its own products, so it can drop the linear barcode sooner. In April 2026 a major UK supermarket did this for a range of fresh own-label products, after a long period of dual marking. Branded products, sold through many retailers, keep both.
- 2027 is a target, not a law. It is the industry’s ambition for retailers’ scanning, and places no legal requirement on suppliers. Retailers will move at different speeds and may set requirements of their own.
- The GTIN stays the same. Adding a 2D barcode needs no new product numbers: the same GTIN is encoded in a different symbol.
- Three symbols are accepted at the till: a QR code using GS1 Digital Link syntax, which GS1 UK promotes as QR codes powered by GS1; a Data Matrix using GS1 Digital Link syntax; and a GS1 DataMatrix.
What a GS1 Digital Link code contains
A GS1 Digital Link code holds a web address built to a fixed pattern. A till reads the product data from it, and a phone opens it as a link. For a product with a batch and an expiry date, it looks like this:
https://example.com/01/09506000134352/10/ABC123?17=271231
example.com: the brand’s own internet domain01/09506000134352: the GTIN, under GS1 Application Identifier (AI) 0110/ABC123: the batch or lot, AI 1017=271231: the expiry date, AI 17, written as YYMMDD: 31 December 2027
A GS1 DataMatrix carries the same data as a GS1 element string, without the web address: (01)09506000134352(17)271231(10)ABC123. Some scanners convert one form into the other before passing it to the till, so the point-of-sale system receives the same GTIN, batch and date either way. The GTIN in both examples is GS1’s own example number.
01 Domain
https://example.comThe brand’s own web address
Same on every pack: artwork
02 GTIN, AI 01
/01/09506000134352The product master in the ERP
Same on every pack: artwork
03 Batch, AI 10
/10/ABC123The production record, in the MES or ERP
Changes by batch: printed on the line
04 Expiry, AI 17
?17=271231Production date plus shelf life, by rule
Changes by batch: printed on the line
The same data as a GS1 element string(01)09506000134352(17)271231(10)ABC123
1. Decide what the code will carry
The GTIN alone changes little. The value of a 2D barcode lies in the data that travels with it, and each item of data has a cost behind it.
- GTIN (AI 01) only: the same for every pack of the product, so it can be printed on the packaging artwork, like today’s barcode.
- Batch or lot (AI 10): supports targeted recalls and withdrawals.
- Best before or expiry date (AI 15 or 17): lets a retailer reduce the price of short-dated stock at the till, or block the sale of out-of-date product.
- Serial number (AI 21): identifies each individual pack.
- Net weight and price (AI 310n, 392n): for variable-measure products, such as fresh meat or cheese.
Anything that changes from batch to batch can no longer be printed on the artwork. It has to be printed on the line, at the time of packing, which turns a packaging change into a systems change.
2. Choose the symbol
- QR code with GS1 Digital Link: readable by a phone’s ordinary camera, so the same code serves the till and the shopper. It needs the most space.
- GS1 DataMatrix: generally the smallest symbol accepted at the till, and the only one approved for regulated healthcare products. A phone needs a dedicated app to read it.
- Data Matrix with GS1 Digital Link: a smaller symbol that still carries a web address, for packs where space matters.
The choice depends on the pack, the printing method and whether consumers are meant to scan it. A product range may need more than one.
3. Trace every new field to its source
Each item of data in the code needs one system that is responsible for it, and a route to the printer.
- The batch, from the MES or the production order in the ERP
- Dates, from the production date and the product’s shelf life, calculated by a rule that someone owns
- Serial numbers, issued by one system only, so none is used twice
- Weights and prices, from the scale or the line, for variable-measure products
The date in the barcode must match the date printed for people to read. If a till can block a sale on the encoded date, a mismatch becomes a product that can’t be sold, or one that sells when it shouldn’t.
4. Check the labelling software and templates
- Whether the label design or label management software can encode GS1 Digital Link URIs and GS1 DataMatrix, including the separators and check digits
- Whether templates can build the code from live data, rather than from a fixed value typed into the design
- How many templates need changing, and whether one data-driven template could replace many copies
- How a template change is approved, versioned and released, especially in regulated environments
Older labelling systems may not support the newer syntax at all. Where that is the case, the change becomes part of a wider legacy labelling modernisation, and it is better planned as one.
5. Check the printers and the pack
- Whether each printer can print a 2D symbol at the size required, at line speed: thermal transfer, thermal inkjet, laser and continuous inkjet all behave differently
- Size: a 2D symbol’s module width (its X-dimension) is 1.5 times that of the equivalent linear barcode, within GS1’s minimum and maximum
- Quiet zone: one module on every side for Data Matrix, four for a QR code
- Placement: within 50 mm of the linear barcode, so one scan finds both quickly
- Colour: black on white reads best; red, orange and yellow are hard to decode, and logos placed inside a code reduce its ability to correct errors
Where the space for a second symbol doesn’t exist on the current label or pack, the change reaches back to artwork and packaging design.
6. Decide who owns the web address
A GS1 Digital Link code is a web address. It identifies the product, and a resolver redirects a phone to whatever the brand chooses to show: product information, allergens, recycling advice or a recall notice.
- GS1 recommends that brand owners use their own internet domain
- The domain and the resolver need an owner, renewal, security and monitoring, like any other public service
- The address must keep working for as long as the product might be in a home, which is often years after it was made
- What each scan shows can change after printing, without reprinting a single label
This is the part of the change that sits outside labelling altogether, and the one most likely to have no owner.
7. Verify, then confirm with each customer
- Verify each new symbol against ISO/IEC 15415 and the GS1 specification, on the real printer and the real substrate, before production
- Build verification into the line, where variable data is printed, so a poor code is caught before it ships
- Confirm each retailer’s requirements, and when they apply, before choosing a symbol for every product
- Test end to end: from the business event, through the template and the printer, to a scan at a till
Questions suppliers ask
Are QR codes replacing barcodes?
Not yet, for most products. Both will appear together until 2D scanning is widespread, and GS1 expects linear barcodes to remain for as long as they are needed. The exceptions are own-label ranges, where the retailer controls every till that scans them.
Is Sunrise 2027 a legal requirement?
No. It is an industry target, coordinated by GS1. Where requirements come, they will come from individual retailers, so each customer’s plans matter more than the date.
Can we use a QR code from an ordinary QR code generator?
Only if it follows GS1 Digital Link syntax and carries a valid GTIN. A QR code holding a plain marketing web address is not read at the till as a product.
Do our printers need replacing?
Not necessarily. Many printers already print 2D symbols. The questions are size, speed and resolution, and whether the variable data can reach the printer at all. Test on the production printer and the real label stock before deciding.
Before choosing an approach
- Which products, and which data in each code: the GTIN only, or batch, dates and serial numbers too?
- Which customers expect 2D codes, and when?
- Where is each label printed today: on the artwork, on the line, or both?
- Can the current labelling software, templates and printers produce compliant 2D symbols?
- Who will own the Digital Link domain and what it shows?
Where to start
The answers come from the current estate: the products, the labels, where their data comes from and how they are printed. A labelling health check establishes them before any change is recommended. From there, the data work follows the same pattern as integrating label printing with an ERP, and the templates and print services fit within the wider design of the label management system.
Planning for 2D barcodes?
Describe the products, the labels and how they are printed today: on the artwork, on the line or both. A short conversation is usually enough to see what the move to 2D involves, and where to start.